P0132moderate severityPowertrain
O2 Sensor Circuit High Voltage Bank 1 Sensor 1
on 2011 Lincoln MKX 3.7L V6 · AWD
What this code means
The upstream O2 sensor voltage on Bank 1 is staying above 0.45V, indicating a rich condition or sensor fault.
Symptoms
- Check Engine Light
- Rich running
- Black exhaust smoke
- Poor fuel economy
Common causes
- Faulty O2 sensor
- Leaking fuel injector
- High fuel pressure
- EVAP purge valve stuck open
Diagnostic steps
- Monitor O2 sensor voltage
- Test fuel pressure
- Check for leaking injectors
- Inspect EVAP purge valve
Repair notes
Replace O2 sensor or fix rich-running cause.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1