P1103moderate severityPowertrain
MAF Sensor In Range But Higher Than Expected
on 2011 Lincoln MKX 3.7L V6 · AWD
What this code means
The MAF sensor signal is within the valid voltage range but consistently higher than expected by the PCM. This suggests the sensor is over-reporting airflow.
Symptoms
- Check Engine Light
- Rich running condition
- Black exhaust smoke
- Poor fuel economy
- Rough idle
Common causes
- Contaminated MAF sensor
- Faulty MAF sensor
- Air filter housing not sealed properly
- PCM calibration issue
Diagnostic steps
- Clean MAF sensor
- Verify air filter housing is sealed
- Check for TSBs related to PCM calibration
- Compare readings to specifications
Repair notes
Clean or replace MAF sensor. Ensure intake system is properly sealed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1