P1728high severityPowertrain
Transmission Slip Error
on 2011 Lincoln MKX 3.7L V6 · AWD
What this code means
The PCM/TCM has detected excessive transmission slip. The actual gear ratio does not match the expected ratio, indicating the transmission is slipping during operation.
Symptoms
- Check Engine Light
- Transmission slipping during acceleration
- RPM flare between shifts
- Harsh shifting
- Reduced fuel economy
- Transmission overheating
Common causes
- Low transmission fluid
- Worn clutch packs
- Faulty shift solenoids
- Valve body issue
- Torque converter failure
- Contaminated transmission fluid
Diagnostic steps
- Check transmission fluid level and condition (color, smell)
- Monitor transmission slip with scan tool
- Check line pressure
- Inspect shift solenoid operation
- Perform transmission fluid and filter service
Repair notes
Check fluid level first. Perform fluid and filter service. If slip persists, internal transmission repair or rebuild likely needed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1