P1605moderate severityPowertrain
PCM Keep Alive Memory Test Error
on 1997 Mazda B3000 3.0L V6 ยท RWD
What this code means
The PCM Keep Alive Memory self-test has detected an error. The PCM cannot properly store or retrieve adaptive learning values from its internal memory.
Symptoms
- Check Engine Light
- PCM defaults to base calibration
- Rough idle initially after restart
- Harsh transmission shifts
Common causes
- KAM circuit voltage intermittent
- Faulty KAM fuse or relay
- PCM internal memory failure
- Battery cable providing unstable voltage
Diagnostic steps
- Check KAM fuse and relay
- Test KAM circuit voltage at PCM connector
- Check battery and alternator output
- Clear code and retest; if recurring, suspect PCM failure
Repair notes
Check the KAM circuit power supply; replace the PCM if internal memory has failed.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1