B0088high severityBody
SRS Control Module Voltage Low
on 2020 Mazda Mazda3 2.5L Skyactiv-G I4 (186 hp) ยท AWD
What this code means
The SRS control module is receiving lower than specified operating voltage.
Symptoms
- Airbag warning light on
- SRS codes set
- Multiple body control faults may occur
Common causes
- Low battery voltage
- Corroded battery terminals
- Faulty ACM power supply circuit
- High-resistance connection in power feed
Diagnostic steps
- Check battery voltage
- Inspect battery terminal connections
- Measure voltage at ACM connector
- Check ground circuit resistance
- Test charging system
Repair notes
Repair battery connections or ACM power circuit. Charge or replace battery if low.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit