B0260moderate severityBody
Convertible Top Motor Circuit
on 2020 Mazda Mazda3 2.5L Skyactiv-G I4 (186 hp) · AWD
What this code means
Malfunction in the convertible/retractable top motor circuit. The top does not open or close.
Symptoms
- Convertible top does not move
- Top stops mid-cycle
- Motor runs but top does not move
- Hydraulic pump running without top movement
Common causes
- Faulty top motor or hydraulic pump
- Low hydraulic fluid
- Hydraulic line leak
- Mechanical latch not releasing
- Top switch failure
Diagnostic steps
- Check convertible top fluid level
- Test top switch
- Listen for motor/pump operation
- Check hydraulic lines for leaks
- Verify latches are releasing
Repair notes
Check hydraulic fluid level first. Replace motor/pump or repair hydraulic leaks.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit