C0201high severityChassis
EPS Motor Circuit Overcurrent
on 2020 Mazda Mazda3 2.5L Skyactiv-G I4 (186 hp) ยท AWD
What this code means
The EPS control module detected excessive current draw from the power steering motor.
Symptoms
- EPS warning light
- Power steering assist reduced
- Steering may become very heavy suddenly
- EPS fault message
Common causes
- EPS motor internal short
- Steering gear binding
- Low tire pressure causing excessive load
- EPS motor bearing failure
- Insufficient module power supply voltage
Diagnostic steps
- Measure EPS motor current draw
- Check tire pressures
- Inspect steering gear for binding
- Test motor winding resistance for shorts
- Check battery voltage and alternator output
Repair notes
Replace EPS motor if shorted. Check steering gear for mechanical binding. Verify electrical supply.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent