Back to 2020 Mazda Mazda3
Help
2020 MAZDA MAZDA3
2.5L Skyactiv-G I4 (186 hp)•AWD•AUTOMATIC•gas
2 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor987Torque6478Fluid16DTC2264Battery2Maintenance0Recalls2
C0325low severityChassis

Ride Height Sensor Calibration Required

on 2020 Mazda Mazda3 2.5L Skyactiv-G I4 (186 hp) · AWD

What this code means

One or more ride height sensors require calibration after service or replacement.

Symptoms

  • Suspension warning light
  • Incorrect ride height all corners
  • Vehicle rides too high or too low
  • Ride height asymmetric

Common causes

  • Sensor replaced without calibration
  • Suspension component service
  • Module replacement
  • Battery disconnect on some vehicles

Diagnostic steps

  1. Perform ride height sensor calibration with scan tool
  2. Verify vehicle is on level ground with correct tire pressure
  3. Check that all sensors are reading plausible values
  4. Confirm calibration procedure completed successfully

Repair notes

Perform ride height calibration on level surface with correct tire pressures and no load.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITE
Shop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Chassis codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2020 Mazda Mazda3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda Mazda3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →