Free API
P0676low severityPowertrain

Cylinder 6 Glow Plug Circuit

on 2006 Mazda MPV 3.0L V6 · FWD

What this code means

The PCM detected a fault in the glow plug control circuit for cylinder 6. Faulty glow plugs cause hard starting and rough operation when the engine is cold.

Symptoms

  • Hard starting in cold weather
  • Rough running when cold
  • Warning lamp illuminated

Common causes

  • Faulty glow plug cylinder 6
  • Corroded or broken wiring
  • Bad glow plug control module
  • Blown fuse or relay

Diagnostic steps

  1. Scan for glow plug fault codes
  2. Measure cylinder 6 glow plug resistance
  3. Check harness and connectors
  4. Test control module output voltage

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Mazda MPV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda MPV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →