Free API
P0940moderate severityPowertrain

Hydraulic Oil Temperature Sensor Circuit Low

on 2006 Mazda MPV 3.0L V6 · FWD

What this code means

The hydraulic oil temperature sensor signal is lower than expected. This usually results from an open circuit or grounded wiring.

Symptoms

  • Transmission warning light on
  • Poor shift performance
  • Incorrect temperature data

Common causes

  • Faulty oil temperature sensor
  • Open or grounded wiring
  • Loose connector
  • Control module fault

Diagnostic steps

  1. Retrieve diagnostic codes
  2. Inspect wiring for open or ground fault
  3. Check connector integrity
  4. Measure sensor resistance

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Mazda MPV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda MPV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →