Free API
P0976moderate severityPowertrain

Shift Solenoid B Control Circuit Low

on 2006 Mazda MPV 3.0L V6 · FWD

What this code means

The PCM sees low voltage on the shift solenoid B control circuit. This often means a short to ground or an open in the wiring.

Symptoms

  • Erratic or no shifting
  • Transmission limp mode
  • Check engine light on

Common causes

  • Short to ground in wiring
  • Faulty shift solenoid B
  • Poor connector contact
  • Internal PCM circuit fault

Diagnostic steps

  1. Retrieve trouble codes and data
  2. Inspect harness for shorts to ground
  3. Check solenoid resistance
  4. Verify PCM output signal

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Mazda MPV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda MPV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →