Free API
P1602high severityPowertrain

Immobilizer Communication Error

on 2006 Mazda MPV 3.0L V6 · FWD

What this code means

The PCM cannot properly communicate with the immobilizer control module. This may prevent the engine from starting.

Symptoms

  • Engine will not start
  • Security light on
  • No communication with immobilizer

Common causes

  • Faulty immobilizer module
  • Damaged wiring between modules
  • Poor connection or ground
  • Faulty PCM

Diagnostic steps

  1. Scan for immobilizer codes
  2. Inspect wiring between PCM and immobilizer
  3. Check power and ground circuits
  4. Repair connections or replace module

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Mazda MPV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda MPV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →