Free API
P1762moderate severityPowertrain

Transmission Fluid Pressure Sensor Circuit

on 2006 Mazda MPV 3.0L V6 · FWD

What this code means

The transmission fluid pressure sensor circuit is reading out of range or has failed. Related to generic P0840 transmission fluid pressure sensor faults.

Symptoms

  • Erratic or harsh shifting
  • Transmission warning light on
  • Poor shift timing

Common causes

  • Faulty fluid pressure sensor
  • Low or dirty transmission fluid
  • Wiring or connector fault
  • Internal transmission pressure problem

Diagnostic steps

  1. Retrieve codes and check fluid level
  2. Inspect pressure sensor wiring
  3. Compare sensor reading to actual pressure
  4. Replace sensor if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Mazda MPV repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mazda MPV — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →