P3060critical severityPowertrain
Gear Ratio Error - Multiple Gears Affected
on 2016 Mazda MX-5 Miata 2.0L I4 · RWD
What this code means
The TCM detected incorrect gear ratios in more than one gear. This typically indicates an internal mechanical transmission problem.
Symptoms
- Check Engine Light
- Slipping in multiple gears
- RPM flare on upshifts
- Harsh downshifts
- Delayed engagement
- Abnormal transmission noise
Common causes
- Internal clutch pack wear
- Worn planetary gear set
- Valve body malfunction
- Low transmission fluid
- Contaminated transmission fluid
Diagnostic steps
- Check transmission fluid level and condition
- Monitor gear ratio PIDs in all gears
- Perform transmission pressure test
- Inspect fluid for metal particles
- Review shift adaptation data
Repair notes
Internal transmission repair or replacement likely required. Replace fluid and filter as part of any repair.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1