B0013critical severityBody
Driver Side Airbag Deployment Circuit Short to Battery
on 2004 Mazda RX-8 1.3L Twin-Rotor 13B-MSP Renesis · RWD
What this code means
A short to battery voltage was detected in the driver side airbag deployment circuit.
Symptoms
- Airbag warning light on
- SRS fault stored
- Unintended deployment risk
Common causes
- Wiring harness chafing against metal
- Connector pin damage
- Faulty airbag squib
- Incorrect wiring repair
Diagnostic steps
- Disconnect battery and wait
- Inspect wiring for chafing
- Check connector pins
- Measure circuit for shorts to B+
Repair notes
Locate and repair the short to battery voltage. Professional service required.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open
B0012
Driver Side Airbag Deployment Circuit Short to Ground
B0014
Passenger Side Airbag Deployment Circuit Open