🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2007 MAZDA TRIBUTE

3.0L V6FWDAUTOMATICgas
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Tribute
Every control module on the 2007-2011 Mazda Tribute — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Anti-Lock Brake System / Dynamic Stability Control Module (ABS/DSC)1.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, mounted on ABS hydraulic unit near master cylinder
🔧 Ford IDS
⚠️ Includes traction control and stability control functions. Requires configuration and brake bleeding procedure.
Body Control Module / Smart Junction Box (BCM / SJB)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind driver side kick panel or under dashboard left side
🔧 Ford IDS
⚠️ Controls lights, wipers, locks, windows, and integrates fuse box functions. Requires configuration for vehicle options.
Electric Power Steering Control Module (EPS CM)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column or under dashboard near steering shaft
🔧 Ford IDS
⚠️ Standard on most models. Requires calibration and VIN programming.
Transmission Control Module (TCM)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, near battery or on transmission (6-speed automatic)
🔧 Ford IDS
⚠️ Only on automatic transmission models. Requires programming and adaptive relearn. 2009+ uses 6-speed transmission.
Powertrain Control Module (PCM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, driver side firewall or mounted on inner fender
🔧 Ford IDS (Ford platform)
⚠️ Tribute shares platform with Ford Escape. Requires VIN programming and immobilizer pairing. Ford IDS required for full programming.
Gateway Module (GWM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard center or integrated into BCM
🔧 Ford IDS
⚠️ Manages communication between different CAN bus networks. May be integrated into BCM on some models.
Four-Wheel Drive Control Module (4WD CM)1.2 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Under center console or near transfer case
🔧 Scan tool
⚠️ AWD/4WD models only. May require transfer case motor relearn procedure.
Restraints Control Module (RCM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console area, under center floor or behind center trim panel
🔧 Ford IDS
⚠️ Requires crash data clearing and configuration. Disconnect battery before removal.
Climate Control Module (CCM)1.0 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Center dashboard, integrated with HVAC control panel
🔧 Self-calibration procedure
⚠️ Automatic climate control models only. Requires actuator calibration after installation.
Parking Aid Module (PAM)1.0 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Rear cargo area, behind rear trim panel or under rear bumper
🔧 Self-calibration
⚠️ Optional equipment. Requires sensor calibration after installation.
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, behind instrument panel face
🔧 Ford IDS
⚠️ Requires mileage programming to match vehicle odometer. Some advanced aftermarket tools can program mileage.
Audio Control Unit (ACU)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Center dashboard, in radio slot
🔧 Self-configuration via menu
⚠️ May require radio code entry or self-configuration through menu settings. Some models plug-and-play.
Passive Anti-Theft System Module (PATS)dealer / factory tool +1.0 hr▸ programming details
📍 Integrated into PCM
🔧 Ford IDS
⚠️ Immobilizer integrated into PCM. Key programming requires dealer tool. PCM replacement requires key reprogramming.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →