🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2024 MERCEDES-BENZ A220 W177

2.0L I4 Turbo M260FWDAUTOMATICgasM260turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this A220 W177
Every control module on the 2019-2026 Mercedes-Benz A220 W177 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Unit (TCU)2.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Transmission housing, driver side
🔧 Xentry Diagnostics + SCN online
⚠️ 7G-DCT (dual-clutch) or 8G-DCT depending on year. Requires transmission adaptation after coding.
Electric Power Steering Control Unit (EPS)2.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Steering column, integrated with steering rack
🔧 Xentry Diagnostics + SCN online
⚠️ Rack-mounted. Requires steering angle sensor calibration and end-stop learning after replacement.
Climate Control Unit (CCU)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 Xentry Diagnostics
⚠️ Requires HVAC actuator calibration after replacement. Some aftermarket tools can code.
Central Gateway Module (CGW)1.5 hr R&Rsecurity gateway +2.0 hr▸ programming details
📍 Under dashboard, center above transmission tunnel
🔧 Xentry Diagnostics + SCN online
⚠️ Security gateway. Replacement requires full vehicle reconfiguration and all module re-authorization. Rarely fails.
MBUX Head Unit (HU/MBUX)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center dashboard, integrated touchscreen
🔧 Xentry Diagnostics + SCN online
⚠️ MBUX system. Requires online activation and feature coding. Navigation/media licenses may need transfer.
Motor Electronics / Engine Control Unit (ME/ECU)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, left side firewall near brake booster
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, requires online SCN coding and EIS pairing. Immobilizer triangle with EIS and cluster.
Electronic Ignition Switch (EIS)1.0 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Steering column, ignition switch area
🔧 Xentry Diagnostics + SCN online
⚠️ Immobilizer and keyless-go. VIN-locked. Key programming requires dealer tool and online authorization.
Electronic Stability Program Control Unit (ESP/ABS)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, left front near fender
🔧 Xentry Diagnostics + SCN online
⚠️ Integrated hydraulic unit. Requires brake bleed after replacement. VIN-locked.
Signal Acquisition and Actuation Module - Rear (SAM-R)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Trunk, left side panel behind trim
🔧 Xentry Diagnostics + SCN online
⚠️ Controls rear lighting, fuel pump relay, trailer functions if equipped.
Camera Control Unit / Surround View (CCU)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, center behind trim or under rear seat
🔧 Xentry Diagnostics
⚠️ 360-degree camera system if equipped. Requires camera calibration and alignment after replacement.
Telematics Communication Module (TCM)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Behind dashboard, center or under rear seat depending on year
🔧 Xentry Diagnostics + SCN online
⚠️ Mercedes me connect. Requires online activation and subscription transfer. SIM card inside.
Restraint Systems Control Unit (SRS)0.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console, under front seats area
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked. Requires crash data clear and occupant classification calibration.
Instrument Cluster (IC)0.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, part of immobilizer triangle. Mileage programming requires dealer authorization.
Door Control Module (DCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (4 modules total)
🔧 Xentry or Autel MaxiSys
⚠️ Controls windows, mirrors, locks per door. Window initialization required after replacement.
Fuel Pump Control Module (FPCM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Trunk, left side panel or under rear seat
🔧 Xentry Diagnostics
⚠️ Controls fuel pump relay and pressure. Basic coding, some aftermarket tools work.
Radar Sensor / DISTRONIC Control Unit (RSU)0.8 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics + calibration
⚠️ Adaptive cruise and collision prevention. Requires radar aim calibration with special target after replacement.
Tailgate Control Module (TGM)0.7 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Tailgate, left side behind trim
🔧 Xentry or Autel MaxiSys
⚠️ Power liftgate if equipped. Requires position learning after replacement.
Parktronic Control Unit (PTS)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, right side panel
🔧 Xentry or Autel MaxiSys
⚠️ Parking sensors. Requires sensor calibration after replacement.
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under each front seat (driver and passenger)
🔧 Xentry or Autel MaxiSys
⚠️ Controls power seat, heating, ventilation if equipped. Basic coding, most aftermarket tools work.
Intelligent Light System Control Unit (ILS)0.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Each headlight assembly (left and right modules)
🔧 Xentry Diagnostics
⚠️ LED headlights. Requires headlight aim calibration after replacement. Left/right modules separate.
Rain/Light Sensor Module (RLS)0.3 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Windshield, behind rearview mirror
🔧 Xentry or Autel MaxiSys
⚠️ Auto wipers and headlights. Basic coding, most tools work.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →