🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2015 MERCEDES-BENZ AMG GT

4.0L Turbo V8RWDAUTOMATICgasM178turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this AMG GT
Every control module on the 2015-2017 Mercedes-Benz AMG GT — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Differential Lock Control Unit (EDLCU)4.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Rear differential housing, integrated
🔧 Xentry Diagnostics + SCN coding
⚠️ Controls AMG rear differential lock. VIN-locked; requires differential oil change and road test calibration.
Electric Power Steering Control Unit (EPS)3.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Steering column, integrated with steering rack assembly
🔧 Xentry Diagnostics + SCN coding
⚠️ Requires steering angle sensor calibration and road test after coding. VIN-locked.
Transmission Control Unit (TCU)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Transmission housing, driver side of 7-speed DCT
🔧 Xentry Diagnostics + SCN coding
⚠️ Integrated with valve body on AMG Speedshift DCT; requires transmission oil change after replacement. VIN-locked.
Intelligent Light System Control Unit - Right (ILS-R)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Right headlight assembly, integrated
🔧 Xentry Diagnostics + SCN coding
⚠️ LED headlight control module. VIN-locked; requires headlight aim calibration after replacement.
Head Unit / COMAND (HU/COMAND)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Center dashboard, behind display screen
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; navigation and vehicle settings stored. May require separate navigation DVD/SD update.
Electronic Stability Program Control Unit (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near fender
🔧 Xentry Diagnostics + SCN coding
⚠️ Requires brake bleed after replacement. VIN-locked; SCN coding mandatory.
Signal Acquisition and Actuation Module - Rear (SAM-R)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry Diagnostics + SCN coding
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN-locked.
Climate Control Unit (CCU)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, center behind HVAC controls
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; requires recalibration of blend doors and sensors after replacement.
Electronic Ignition Switch (EIS)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column, upper shroud area
🔧 Xentry Diagnostics + SCN coding
⚠️ Critical security component; all keys must be reprogrammed. Part of security triangle. Requires online Mercedes authorization.
Door Control Module - Passenger (DCM-P)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Passenger door, lower section behind trim panel
🔧 Xentry Diagnostics or Autel MaxiSys
⚠️ Controls window, mirror, lock. Window auto-up/down requires relearn after replacement.
Motor Electronics / Engine Control Unit (ME/ECU)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, right side firewall near brake master cylinder
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; requires SCN retrieval from Mercedes servers. Part of security triangle with EIS and cluster.
Central Gateway Module (CGW)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, left side behind kick panel
🔧 Xentry Diagnostics + SCN coding
⚠️ Security gateway; controls CAN bus access. VIN-locked; replacement requires extensive recoding of all modules.
Adaptive Damping System Control Unit (ADS)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, center forward area near rear seat bulkhead
🔧 Xentry Diagnostics + SCN coding
⚠️ Controls AMG Ride Control suspension. VIN-locked; requires ride height calibration after replacement.
Restraint Systems Control Unit (SRS)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Center console tunnel, below center armrest
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; all airbag/seatbelt components must be coded to new module. Crash data stored.
Parktronic Control Unit (PTS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry Diagnostics + SCN coding
⚠️ Controls parking sensors. VIN-locked; sensor calibration required after replacement.
Telematics Communication Module (TCM)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, left side behind trim panel
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; requires Mercedes me connect subscription activation. Contains cellular modem.
Rear View Camera Control Unit (RVC)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk lid, integrated with camera assembly
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; camera alignment calibration required after replacement.
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; mileage programming requires dealer authorization. Part of security triangle with ECM and EIS.
Fuel Pump Control Module (FPCM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side near SAM-R
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked; controls dual fuel pumps on AMG GT. Requires fuel system pressure test after replacement.
Seat Control Module - Passenger (SCM-P)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Passenger seat, under seat frame
🔧 Xentry Diagnostics or Autel MaxiSys
⚠️ Controls power seat, heating, ventilation. Basic adaptation possible with aftermarket tools.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →