🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2017 MERCEDES-BENZ C400 W205

3.0L V6 BiTurbo M276RWDAUTOMATICgasM276.850turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this C400 W205
Every control module on the 2015-2018 Mercedes-Benz C400 W205 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Unit (TCU)4.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated in valve body inside transmission, under vehicle center
🔧 Xentry Diagnostics + SCN coding
⚠️ Requires transmission pan removal and fluid service. VIN-locked, adaptive values must be reset.
Electric Power Steering Control Unit (EPS)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Steering column, under dashboard left side
🔧 Xentry Diagnostics + SCN coding
⚠️ Steering angle sensor calibration required after replacement. VIN-locked.
Central Gateway Module (CGW)2.0 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Dashboard center, behind center console trim
🔧 Xentry Diagnostics + SCN coding
⚠️ Security gateway enforces authentication. VIN-locked. All modules may need reconfiguration after replacement.
4MATIC Control Unit (4M)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Under vehicle, near transfer case on AWD models
🔧 Xentry Diagnostics + SCN coding
⚠️ Only on 4MATIC AWD models. VIN-locked. Drivetrain adaptation required.
Electronic Stability Program Control Unit (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left front near battery
🔧 Xentry Diagnostics + SCN coding
⚠️ Integrated hydraulic unit. Brake bleeding required after replacement. VIN-locked.
Signal Acquisition and Actuation Module - Rear (SAM-R)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Trunk, left side panel behind trim
🔧 Xentry Diagnostics + SCN coding
⚠️ Controls rear electrical functions. VIN-locked. Rear lighting and convenience features require recoding.
Climate Control Unit (CCU)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard center, behind HVAC controls
🔧 Xentry or Autel MaxiSys
⚠️ Adaptation for flap positions and sensor calibration. Less security-critical than powertrain modules.
Electronic Ignition Switch (EIS)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column, integrated with ignition switch
🔧 Xentry Diagnostics + SCN coding
⚠️ Part of security triangle with ECM and cluster. Key programming required. Highly security-locked.
Active Lane Keeping Assist Control Unit (ALKA)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Windshield, integrated with camera module behind mirror
🔧 Xentry Diagnostics + SCN coding
⚠️ Camera calibration required. VIN-locked. Windshield replacement may affect calibration.
Radar Sensor / DISTRONIC Control Unit (RSU)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Front bumper center, behind grille emblem
🔧 Xentry Diagnostics + SCN coding
⚠️ Radar calibration and alignment required. VIN-locked. ADAS recalibration mandatory.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, lower section behind trim panel
🔧 Xentry or Autel MaxiSys
⚠️ Controls windows, mirrors, locks per door. Window initialization required after replacement.
Motor Electronics / Engine Control Unit (ME/ECU)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall near brake master cylinder
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked, requires SCN from Mercedes servers. Part of security triangle with EIS and cluster.
Head Unit / COMAND (HU/COMAND)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard center, integrated in center stack
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked. Navigation and vehicle configuration data must be programmed.
Airmatic / Active Damping System Control Unit (ADS/Airmatic)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, right side panel behind trim
🔧 Xentry Diagnostics + SCN coding
⚠️ Ride height calibration required. VIN-locked. Only on models with air suspension option.
Restraint Systems Control Unit (SRS)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Center console tunnel, under front seats area
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked. Crash data must be cleared. Battery disconnect required.
Camera Control Unit / Surround View (CCU)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, right side panel or under rear shelf
🔧 Xentry Diagnostics + SCN coding
⚠️ Camera calibration required. VIN-locked on models with 360-degree camera system.
Instrument Cluster (IC)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked, part of security triangle. Mileage programming requires dealer authorization.
Fuel Pump Control Module (FPCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, under floor panel near fuel tank
🔧 Xentry or Autel MaxiSys
⚠️ Fuel system pressure test recommended after replacement. Basic adaptation only.
Telematics Communication Module (TCM)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, right side panel or under rear shelf
🔧 Xentry Diagnostics + SCN coding
⚠️ VIN-locked. Cellular and GPS functions. Subscription activation required.
Intelligent Light System Control Unit (ILS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Engine bay, behind headlight assemblies (left and right)
🔧 Xentry or Autel MaxiSys
⚠️ Adaptive headlight calibration required. One module per side on LED headlight models.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, left side panel behind trim
🔧 Xentry or Autel MaxiSys
⚠️ Parking sensor calibration required. May be integrated with camera module on some builds.
Seat Control Module (SCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under front seats (driver and passenger)
🔧 Xentry or Autel MaxiSys
⚠️ Memory seat positions and heating/ventilation. One module per seat with memory function.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →