🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2000 MERCEDES-BENZ CLK55 AMG C208

5.4L V8 M113RWDAUTOMATICgasM113
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this CLK55 AMG C208
Every control module on the 1999-2002 Mercedes-Benz CLK55 AMG C208 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Transmission Control (ETC)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Star Diagnosis DAS/Xentry
⚠️ Requires transmission drop for access. Adaptive shift values must be reset after coding.
Electronic Ignition Switch (EIS)1.8 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column, behind ignition lock cylinder
🔧 Star Diagnosis DAS/Xentry
⚠️ Critical security component. Replacement requires SCN coding and key synchronization. Must match ECM and cluster. Steering wheel removal required.
Electronic Stability Program / Anti-lock Brake System (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near fender
🔧 Star Diagnosis DAS/Xentry
⚠️ Integrated hydraulic unit. Brake bleeding required after replacement. VIN coding mandatory.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Center console, behind climate control panel
🔧 Star Diagnosis or Autel
⚠️ Basic adaptation possible with aftermarket tools. Full coding requires factory tool.
Convertible Top Control Module (CTCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, center behind rear seat bulkhead
🔧 Star Diagnosis or Autel
⚠️ Cabriolet models only. Hydraulic system bleeding may be required. Basic relearn possible with aftermarket tools.
Motor Electronics (ME 2.0)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side firewall near brake master cylinder
🔧 Star Diagnosis DAS/Xentry
⚠️ VIN-locked; SCN coding required. Part of EIS-ECM-cluster security triangle. Aftermarket tools can read/clear codes but SCN programming requires factory tool.
Supplemental Restraint System Control Unit (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath shifter assembly
🔧 Star Diagnosis DAS/Xentry
⚠️ Battery disconnect mandatory. Wait 90 seconds before removal. VIN-locked.
Signal Acquisition Module - Rear (SAM-R)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Trunk, left side behind trim panel
🔧 Star Diagnosis DAS/Xentry
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN coding required.
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind instrument panel
🔧 Star Diagnosis DAS/Xentry
⚠️ VIN and mileage programming required. Part of security triangle with EIS and ECM. Mileage transfer from old cluster mandatory.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Star Diagnosis or Autel
⚠️ Optional equipment. Sensor calibration required after replacement.
Audio Gateway (AGW)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, left side near CD changer location
🔧 Star Diagnosis or Autel
⚠️ Radio code may be required after battery disconnect. Fiber optic MOST bus connection.
Tele Aid Module (TAM)0.7 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Star Diagnosis DAS/Xentry
⚠️ Optional equipment. Analog cellular network no longer functional in US. VIN coding required if present.
Seat Control Module (SCM)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Under driver/passenger seat
🔧 Star Diagnosis or Autel
⚠️ Memory seats only. Simple relearn procedure. Left and right modules independent.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →