🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2011 MERCEDES-BENZ CLS63 AMG

6.2L V8RWDAUTOMATICgasM156
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this CLS63 AMG
Every control module on the 2011-2018 Mercedes-Benz CLS63 AMG — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Transmission Control (ETC)2.5 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Xentry Diagnostics + SCN
⚠️ MCT 7-speed (2011-2014) or 7G-Tronic Plus (2015-2018). VIN-locked.
Climate Control Unit (CCU)2.0 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Behind center dash, above transmission tunnel
🔧 Xentry Diagnostics
⚠️ Dual-zone automatic climate control. Dash removal required.
Central Gateway Module (CGW)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind dashboard, left of steering column
🔧 Xentry Diagnostics + SCN
⚠️ CAN bus hub and security gateway. Replacement requires extensive recoding.
COMAND Head Unit (COMAND)1.8 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Trunk, left side behind trim panel (2011-2014) or behind dashboard (2015-2018)
🔧 Xentry Diagnostics + SCN
⚠️ NTG4.5 (2011-2014) or NTG5 (2015-2018). MOST fiber optic bus. VIN-locked.
Electronic Stability Program / Anti-lock Brake System (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front corner near fender
🔧 Xentry Diagnostics + SCN
⚠️ Integrated hydraulic unit. Brake bleeding required after replacement.
Electronic Ignition Switch (EIS)1.5 hr R&Rdealer / factory tool +1.2 hr▸ programming details
📍 Steering column, behind ignition lock cylinder
🔧 Xentry Diagnostics + SCN
⚠️ Security triangle component (EIS-ME-IC). Key programming required. Dealer-only.
Airmatic / Active Body Control (ABC)1.3 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, right side near strut tower
🔧 Xentry Diagnostics
⚠️ Active Body Control hydraulic suspension. Requires system bleed after replacement.
Instrument Cluster (IC)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind instrument panel
🔧 Xentry Diagnostics + SCN
⚠️ Security triangle component. Mileage programming requires dealer authorization.
Motor Electronics (ME)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall, below brake master cylinder
🔧 Xentry Diagnostics + SCN
⚠️ VIN-locked; requires SCN coding and EIS pairing. AMG M157 5.5L biturbo V8.
Night View Assist Control Unit (NVA)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics
⚠️ Infrared night vision (optional). Rare; expensive component.
Camera Control Unit / Surround View (CCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, center behind trim panel
🔧 Xentry Diagnostics
⚠️ 360-degree camera system (optional). Calibration required after replacement.
Signal Acquisition Module - Rear (SAM-R)0.9 hr R&Rdealer / factory tool +0.7 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry Diagnostics + SCN
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN-locked.
Restraint Systems Control Unit (SRS)0.8 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Center console, beneath center armrest
🔧 Xentry Diagnostics + SCN
⚠️ VIN-locked. Crash data stored; must be cleared after replacement.
Door Control Module (DCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, lower section (4 units)
🔧 Xentry or Autel MaxiSys
⚠️ Window, mirror, lock control. Door panel removal required.
Radar Sensor / DISTRONIC Control Unit (RSU)0.8 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics + calibration
⚠️ Adaptive cruise control. Requires alignment/calibration after replacement.
Telematics Communication Module (TCM)0.7 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry Diagnostics + SCN
⚠️ 3G network (2011-2014) or 4G LTE (2015-2018). Requires carrier activation.
Parktronic Control Unit (PTS)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, left side behind trim panel
🔧 Xentry or Autel MaxiSys
⚠️ Sensor calibration required after replacement.
Fuel Pump Control Module (FPCM)0.5 hr R&Rrelearn only +0.1 hr▸ programming details
📍 Trunk, right side near SAM-R
🔧 Xentry or basic scan tool
⚠️ Simple adaptation; may self-learn after key cycles.
Intelligent Light System Control Unit (ILS)0.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind each headlight assembly (2 units)
🔧 Xentry or Autel MaxiSys
⚠️ Bi-Xenon or LED (2015+). Active curve lighting and adaptive high beam.
Seat Control Module (SCM)0.4 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under each front seat (2 units)
🔧 Xentry or Autel MaxiSys
⚠️ Memory seats, heating, ventilation, massage. Per-seat module.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →