🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.
Back to search

2007 MERCEDES-BENZ E320 CDI W211

3.0L V6 Diesel OM642•RWD•AUTOMATIC•diesel•OM642•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this E320 CDI W211 →
Every control module on the 2005-2009 Mercedes-Benz E320 CDI W211 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Transmission Control (ETC)2.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Star Diagnosis DAS/Xentry
⚠️ Requires transmission drop for access. SCN coding and adaptation required. 7G-TRONIC transmission.
Climate Control Module (CCM)2.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard, center behind climate controls
🔧 Star Diagnosis or Autel
⚠️ Dashboard partial removal required. Basic adaptation possible with aftermarket tools.
Electronic Stability Program / Anti-lock Brake System (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near fender
🔧 Star Diagnosis DAS/Xentry
⚠️ Brake bleeding required after replacement. SCN coding mandatory.
Central Gateway (CGW)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, center behind radio or left side near SAM-F
🔧 Star Diagnosis DAS/Xentry
⚠️ Handles CAN bus communication routing. SCN coding required. Not present on all early 2005 models.
Electronic Ignition Switch (EIS)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column, behind ignition lock
🔧 Star Diagnosis DAS/Xentry
⚠️ Critical security component. Requires online SCN authorization, key programming, and synchronization with ECM/cluster. Steering lock removal often necessary.
Audio Gateway / COMAND (AGW/COMAND)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Center console, behind head unit or trunk left side (AGW)
🔧 Star Diagnosis or Autel
⚠️ COMAND navigation system optional. AGW handles audio routing. Basic coding possible with aftermarket tools.
Instrument Cluster (IC)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Star Diagnosis DAS/Xentry
⚠️ VIN and mileage programming required. Part of EIS-ECM-cluster security triangle. Mileage transfer requires dealer authorization.
Motor Electronics (ME)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall near brake master cylinder
🔧 Star Diagnosis DAS/Xentry
⚠️ SCN coding required; VIN-locked to EIS and cluster security triangle. Diesel variant uses CDI-specific calibration.
Signal Acquisition Module - Rear (SAM-R)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Trunk, right side panel
🔧 Star Diagnosis DAS/Xentry
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN-locked; SCN coding required.
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, lower section
🔧 Star Diagnosis or Autel
⚠️ Controls windows, mirrors, locks per door. Four modules total. Door panel removal required.
Airmatic / Adaptive Damping System (ADS/Airmatic)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, left side panel near SAM-R
🔧 Star Diagnosis DAS/Xentry
⚠️ Optional equipment. Calibration and ride height adaptation required after replacement.
Tele Aid Module (TAM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, left side panel or under rear seat
🔧 Star Diagnosis DAS/Xentry
⚠️ Optional equipment. Requires activation and subscription. SCN coding required.
Supplemental Restraint System Control Unit (SRS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, under front seats
🔧 Star Diagnosis DAS/Xentry
⚠️ Battery disconnect required. Crash data must be cleared; SCN coding required.
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, right side near SAM-R or integrated into SAM-R
🔧 Star Diagnosis or Autel
⚠️ May be integrated into SAM-R on some models. Controls fuel pump relay and pressure.
Pre-Safe Control Unit (PSM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console or under front seats
🔧 Star Diagnosis DAS/Xentry
⚠️ Optional equipment. Coordinates pre-collision safety systems. SCN coding required.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, right side panel
🔧 Star Diagnosis or Autel
⚠️ Optional equipment. Sensor calibration may be needed.
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver/passenger seat
🔧 Star Diagnosis or Autel
⚠️ Controls power seat, memory, heating. One per front seat. Basic coding with aftermarket tools.
Bi-Xenon Control Unit (XCU)0.5 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind each headlight assembly
🔧 Star Diagnosis or Autel
⚠️ Optional Bi-Xenon equipment. Self-leveling adaptation required. Two modules (left/right).
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →