🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2017 MERCEDES-BENZ E63 AMG

4.0L V8 BiTurbo M177AWDAUTOMATICgasM177turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this E63 AMG
Every control module on the 2014-2017 Mercedes-Benz E63 AMG — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Transmission Control (ETC)2.5 hr R&Rdealer / factory tool +0.7 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Xentry Diagnostics + SCN
⚠️ MCT 7-speed (2014-2016) or AMG Speedshift 9-speed (2017). Module integrated with valve body, requires transmission fluid refill and adaptation.
Electric Power Steering Control Unit (EPS)2.0 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Steering column, mid-section
🔧 Xentry Diagnostics + SCN
⚠️ AMG Performance Steering. Requires steering angle sensor calibration and VIN coding.
COMAND (COMAND)1.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, center stack behind head unit
🔧 Xentry Diagnostics
⚠️ COMAND NTG5 system (2014-2016) or NTG5.5 (2017). Coding for vehicle options and navigation.
Electronic Stability Program / Anti-lock Brake System (ESP/ABS)1.5 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Engine bay, left front corner near fender
🔧 Xentry Diagnostics + SCN
⚠️ Requires brake bleed after replacement. VIN-locked.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard, behind center climate controls
🔧 Xentry or Autel
⚠️ Requires actuator calibration after replacement.
4MATIC Control Unit (4M)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Transmission tunnel, near transfer case (4MATIC models only)
🔧 Xentry Diagnostics + SCN
⚠️ E63 AMG S 4MATIC only (2014+). Controls torque distribution. Requires adaptation after replacement.
Signal Acquisition Module - Rear (SAM-R)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry Diagnostics + SCN
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN-locked.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, lower section
🔧 Xentry or Autel
⚠️ Window and mirror calibration. Four modules (all doors).
Motor Electronics (ME)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall, below brake master cylinder
🔧 Xentry Diagnostics + SCN
⚠️ VIN-locked, requires SCN coding and EIS pairing. AMG 5.5L biturbo V8 (2014-2016) or 4.0L biturbo V8 (2017) calibration.
Night View Assist Control Unit (NVA)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics
⚠️ Infrared night vision system (optional). Calibration required after replacement.
Central Gateway (CGW)1.0 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Dashboard, left side behind fuse panel
🔧 Xentry Diagnostics + SCN
⚠️ CAN bus gateway with enhanced security. VIN-locked, critical for network communication.
Electronic Ignition Switch (EIS)1.0 hr R&Rdealer / factory tool +1.2 hr▸ programming details
📍 Steering column, behind ignition slot
🔧 Xentry Diagnostics + SCN
⚠️ Security triangle component (EIS-ME-IC). Key programming required. Dealer-only for new keys.
DISTRONIC Control Unit / Radar Sensor (RSU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics + SCN
⚠️ DISTRONIC PLUS adaptive cruise control. Requires alignment and calibration after replacement.
Airmatic / Adaptive Damping System (ADS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side near SAM-R
🔧 Xentry Diagnostics + SCN
⚠️ AMG Ride Control with multiple drive modes. Requires calibration and ride height adaptation.
Camera Control Unit / Surround View (CCU)0.9 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Trunk, near COMAND module
🔧 Xentry Diagnostics
⚠️ 360-degree camera system (if equipped). Calibration required.
Instrument Cluster (IC)0.9 hr R&Rdealer / factory tool +0.7 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Xentry Diagnostics + SCN
⚠️ Security triangle component. Mileage programming requires dealer authorization. AMG-specific display with configurable screens.
Fuel Pump Control Module (FPCM)0.9 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, right side near fuel tank
🔧 Xentry or Autel
⚠️ Controls dual fuel pumps on AMG models.
Supplemental Restraint System Control Unit (SRS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath center armrest
🔧 Xentry Diagnostics + SCN
⚠️ VIN-locked, requires crash data clear and component coding.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, left side behind trim
🔧 Xentry or Autel
⚠️ Sensor calibration required after replacement.
Seat Control Module (SCM)0.7 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and passenger seats
🔧 Xentry or Autel
⚠️ Memory seat with massage and ventilation. Calibration required. Two modules (driver/passenger).
Telematics Communication Module (TCM)0.7 hr R&Rdealer / factory tool +0.4 hr▸ programming details
📍 Trunk, left side near SAM-R
🔧 Xentry Diagnostics
⚠️ mbrace system. Requires subscription activation after replacement.
Intelligent Light System Control Unit (ILS)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Behind each headlight assembly (left and right)
🔧 Xentry or Autel
⚠️ LED adaptive headlight system. Leveling calibration required. Two modules (left/right).
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →