🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2025 MERCEDES-BENZ E63 AMG

4.0L Turbo V8RWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this E63 AMG
Every control module on the 2024-2026 Mercedes-Benz E63 AMG — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Unit (TCU)2.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Xentry Diagnostics + SCN online
⚠️ AMG Speedshift MCT 9-speed. Requires transmission fluid change after replacement, adaptation drive cycle.
Rear Axle Steering Control Unit (RAS)2.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Rear axle, center of vehicle
🔧 Xentry Diagnostics + SCN online
⚠️ Rear-axle steering system. Requires extensive alignment and calibration after replacement.
Mild Hybrid Battery Management System (BMS)2.0 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Trunk, right side panel
🔧 Xentry Diagnostics + SCN online
⚠️ 48V mild hybrid system. Requires high-voltage safety procedures and battery calibration.
Climate Control Unit (CCU)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 Xentry Diagnostics
⚠️ Dual-zone automatic climate with ENERGIZING comfort control. Requires HVAC self-calibration.
Electric Power Steering Control Unit (EPS)1.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Steering column, below instrument panel
🔧 Xentry Diagnostics + SCN online
⚠️ Requires steering angle sensor calibration and road test after coding.
Digital Light Control Unit (DLC)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Each headlight assembly (left and right)
🔧 Xentry Diagnostics + SCN online
⚠️ DIGITAL LIGHT with 1.3 million pixels per headlight. Requires extensive calibration after replacement.
AMG Active Ride Control Suspension Module (ARC)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Trunk, right side panel
🔧 Xentry Diagnostics + SCN online
⚠️ AMG Active Ride Control with anti-roll function. Requires ride height calibration and road test.
Electronic Stability Program Control Unit (ESP/ABS)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, left front corner near brake master cylinder
🔧 Xentry Diagnostics + SCN online
⚠️ Integrated hydraulic unit. Brake bleeding required after replacement.
Electronic Ignition Switch (EIS)1.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Steering column, upper section
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, requires all keys to be reprogrammed. Forms security triangle with ECM and cluster.
Head Unit / MBUX (HU/MBUX)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Behind center dashboard display
🔧 Xentry Diagnostics + SCN online
⚠️ MBUX infotainment with 12.3-inch display and augmented reality navigation. VIN-locked.
Motor Electronics / Engine Control Unit (ME/ECU)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, left side firewall behind air filter housing
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, requires SCN coding and EIS pairing. Twin-turbo V8 with mild hybrid system integration.
Central Gateway Module (CGW)1.2 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Left footwell, behind kick panel
🔧 Xentry Diagnostics + SCN online
⚠️ Enhanced security gateway. Replacement requires all modules to be re-authorized. Critical component.
Rear Signal Acquisition and Actuation Module (SAM-R)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Trunk, left side panel
🔧 Xentry Diagnostics + SCN online
⚠️ Controls rear lighting, fuel pump relay, trunk functions. VIN-locked.
Camera Control Unit / Surround View (CCU)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, right side panel
🔧 Xentry Diagnostics
⚠️ 360-degree camera system with 3D view. Requires camera alignment and calibration.
Instrument Cluster (IC)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Instrument panel, behind steering wheel
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, mileage programming requires dealer authorization. 12.3-inch digital display.
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door (4 modules total)
🔧 Xentry or Autel MaxiSys
⚠️ Controls windows, mirrors, locks per door. Requires window initialization.
Tailgate Control Module (TGM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk lid, left side
🔧 Xentry or Autel MaxiSys
⚠️ Power trunk with hands-free access. Requires position calibration.
Restraint Systems Control Unit (SRS)0.8 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Center console, beneath center armrest
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, requires crash data clear and component verification.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, center panel behind trim
🔧 Xentry or Autel MaxiSys
⚠️ Front and rear parking sensors. Requires sensor calibration.
Active Lane Keeping Assist Control Unit (ALKA)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Windshield, behind rearview mirror
🔧 Xentry Diagnostics
⚠️ Camera-based lane keeping with enhanced detection. Requires windshield camera calibration.
Seat Control Module (SCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under each front seat (driver and passenger)
🔧 Xentry or Autel MaxiSys
⚠️ AMG Performance seats with memory, massage, and heating/cooling. Requires seat position relearn.
Telematics Communication Module (TCM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear parcel shelf, driver side
🔧 Xentry Diagnostics
⚠️ Mercedes me connect with 5G capability. Requires subscription activation after replacement.
Fuel Pump Control Module (FPCM)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, left side panel near SAM-R
🔧 Xentry or Autel MaxiSys
⚠️ Controls dual fuel pumps. Requires fuel system pressure test after replacement.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →