for 2019 Mercedes-Benz G-Class 4.0L Turbo V8 · 4WD
Units
🔧Does this apply to your car? On most vehicles a replacement ABS module must be programmed/coded to the vehicle and the brakes bled (often with a scan-tool-driven bleed cycle) before the system works. The part swap alone will not finish this job — budget for programming at a shop or dealer if you do not have a capable scan tool.
3 fasteners
Seq
Component
Torque
Angle
—
Bleeder Screw
12 lb-ft · 16 Nm
—
—
Caliper Mounting Bolts
Critical
75 lb-ft · 101 Nm
—
—
Wheel Lug Nuts✓ Verified
Critical
105 lb-ft · 142.4 Nm
—
For shop owners
Tired of looking specs up mid-job?
Auto Shop Base keeps torque specs, labor times and fluids right on the work order.
The 2019 Mercedes-Benz G-Class 4.0L Turbo V8 repair data is free for every DIYer and shop on earth, permanently, because Open Labor Project paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Open.