🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2021 MERCEDES-BENZ GLE43 AMG

3.0L Turbo V6AWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this GLE43 AMG
Every control module on the 2020-2023 Mercedes-Benz GLE43 AMG — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Climate Control Unit (CCU)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, above transmission tunnel
🔧 Xentry Diagnostics
⚠️ Requires refrigerant recovery/recharge. Coding for vehicle-specific HVAC configuration.
Transmission Control Unit (TCU)2.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Transmission housing, driver side
🔧 Xentry Diagnostics + SCN online
⚠️ 9G-TRONIC transmission. Requires transmission fluid change during R&R. SCN coding mandatory.
Electric Power Steering Control Unit (EPS)2.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Steering column, integrated with steering gear
🔧 Xentry Diagnostics + SCN online
⚠️ Requires steering angle sensor calibration and SCN coding after replacement.
4MATIC Control Unit (4M)2.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Transfer case housing, center of vehicle
🔧 Xentry Diagnostics + SCN online
⚠️ Controls AWD system. Requires SCN coding and drivetrain adaptation.
Head Unit / MBUX (HU/MBUX)1.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Center dashboard, integrated with touchscreen display
🔧 Xentry Diagnostics + SCN online
⚠️ MBUX system introduced mid-2020. Requires extensive coding for all infotainment and vehicle settings. VIN-locked.
Signal Acquisition and Actuation Module - Rear (SAM-R)1.8 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Rear cargo area, left side behind trim panel
🔧 Xentry Diagnostics + SCN online
⚠️ Controls rear electrical functions. VIN-locked, requires SCN coding.
Central Gateway Module (CGW)1.5 hr R&Rsecurity gateway +2.0 hr▸ programming details
📍 Under dashboard, center console area
🔧 Xentry Diagnostics + SCN online
⚠️ Security gateway. Replacement requires extensive coding and all module re-authentication. Dealer-only.
Motor Electronics / Engine Control Unit (ME/ECU)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, left side firewall near brake master cylinder
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked, requires SCN coding and EIS pairing. Independent shops need Xentry OpenShell or dealer access.
Electronic Ignition Switch (EIS)1.2 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Steering column, ignition switch area
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked. Key programming and ECM pairing required. Dealer-only for security reasons.
Airmatic / Active Body Control Module (ADS/ABC)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Front left engine bay, near shock tower
🔧 Xentry Diagnostics + SCN online
⚠️ Air suspension with adaptive damping. Requires ride height calibration and damper adaptation after replacement.
Electronic Stability Program Control Unit (ESP/ABS)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, left front near fender
🔧 Xentry Diagnostics + SCN online
⚠️ Integrated hydraulic unit. Requires brake bleeding after replacement. SCN coding required.
Camera Control Unit / Surround View (CCU)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind rearview mirror or under front bumper
🔧 Xentry Diagnostics
⚠️ 360-degree camera system. Requires camera calibration and alignment procedure.
Instrument Cluster (IC)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked. Mileage programming requires dealer authorization and legal documentation.
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each door, lower section
🔧 Xentry or Autel MaxiSys
⚠️ Controls windows, mirrors, locks. Basic adaptation usually sufficient.
Radar Sensor / DISTRONIC Control Unit (RSU)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Xentry Diagnostics + SCN online + alignment tool
⚠️ Adaptive cruise control radar. Requires precise alignment with factory alignment tool after replacement.
Telematics Communication Module (TCM)0.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Under rear seat or cargo area, varies by market
🔧 Xentry Diagnostics + SCN online
⚠️ Handles Mercedes me connect services. Requires online activation and subscription pairing.
Restraint Systems Control Unit (SRS)0.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console, under front seats area
🔧 Xentry Diagnostics + SCN online
⚠️ VIN-locked. Requires crash data clearing and occupant classification calibration.
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under vehicle, near fuel tank
🔧 Xentry or Autel MaxiSys
⚠️ Basic adaptation for fuel system parameters. Most aftermarket tools can handle this.
Parktronic Control Unit (PTS)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear bumper area, behind trim
🔧 Xentry or Autel MaxiSys
⚠️ Parking sensors front and rear. Requires sensor calibration after replacement.
Tailgate Control Module (TGM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Tailgate, integrated with latch assembly
🔧 Xentry or Autel MaxiSys
⚠️ Power liftgate with hands-free operation. Requires position learning procedure after replacement.
Trailer Module (TRM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, near hitch receiver
🔧 Xentry or Autel MaxiSys
⚠️ Optional trailer hitch package. Controls trailer lighting and stability. Basic adaptation required.
Seat Control Module (SCM)0.6 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under each front seat
🔧 Xentry or Autel MaxiSys
⚠️ Controls power seat, heating, ventilation, massage. Basic coding for seat configuration.
Intelligent Light System Control Unit (ILS)0.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Each headlight assembly, integrated
🔧 Xentry Diagnostics
⚠️ LED or MULTIBEAM LED headlights. Requires coding for adaptive lighting functions and headlight leveling calibration.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →