Free API
3.5L V6AWDAUTOMATICgasM272
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1225low severityPowertrain

Intake Manifold Air Control Solenoid Malfunction

on 2012 Mercedes-Benz ML 3.5L V6 · AWD

What this code means

The ECU detected a malfunction in the intake manifold runner control solenoid. This solenoid controls variable-length intake runners to optimize torque across the RPM range.

Symptoms

  • Check Engine Light
  • Reduced mid-range torque
  • Slight hesitation on acceleration

Common causes

  • Faulty intake runner control solenoid
  • Vacuum leak at solenoid actuator
  • Broken or stuck intake runner flaps
  • Wiring issue to solenoid

Diagnostic steps

  1. Test solenoid operation with scan tool
  2. Inspect vacuum lines to runner actuator
  3. Visually inspect intake runner flaps
  4. Test solenoid resistance
  5. Check wiring

Repair notes

Replace the intake manifold runner control solenoid or repair vacuum lines.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Mercedes-Benz ML repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mercedes-Benz ML — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →