P1335high severityPowertrain
Crankshaft Position Sensor IFI Malfunction
on 2012 Mercedes-Benz ML 3.5L V6 · AWD
What this code means
The ECU detected an Instantaneous Firing Indication (IFI) malfunction from the crankshaft position sensor. The sensor is not providing reliable crankshaft angle data needed for precise fuel injection and ignition timing.
Symptoms
- Check Engine Light
- Engine may not start
- Intermittent stalling
- Rough running
- Misfires under load
Common causes
- Faulty crankshaft position sensor
- Damaged reluctor wheel
- Sensor wiring damage
- Electromagnetic interference
- Incorrect sensor type installed
Diagnostic steps
- Test CKP sensor signal pattern
- Inspect reluctor wheel for missing or damaged teeth
- Check sensor wiring for damage or interference
- Test sensor supply voltage
- Verify correct part number
Repair notes
Replace the crankshaft position sensor and inspect the reluctor wheel.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1