Free API
3.5L V6AWDAUTOMATICgasM272
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1661high severityPowertrain

Fuel Injector Voltage Fault Cylinders 1 and 4

on 2012 Mercedes-Benz ML 3.5L V6 · AWD

What this code means

The ECU detected a voltage fault in the fuel injector circuit for Cylinders 1 and 4. These cylinders share a common injector driver circuit, and the fault affects both injectors simultaneously.

Symptoms

  • Check Engine Light
  • Misfires on Cylinders 1 and 4
  • Rough running
  • Loss of power
  • Rich or lean condition

Common causes

  • Faulty injector driver circuit in ECU
  • Wiring short or open in shared circuit
  • Failed fuel injector Cylinder 1 or 4
  • Connector corrosion
  • Power supply issue to injectors

Diagnostic steps

  1. Test injector resistance Cylinders 1 and 4
  2. Check shared circuit wiring
  3. Inspect connectors for corrosion
  4. Test ECU injector driver output
  5. Monitor injector pulse width

Repair notes

Repair wiring in the shared injector circuit or replace the faulty injector.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Mercedes-Benz ML repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mercedes-Benz ML — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →