Free API
🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2009 MERCEDES-BENZ ML350 BLUETEC W164

3.0L V6 Diesel OM642•AWD•AUTOMATIC•diesel•OM642•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this ML350 BlueTEC W164 →

Factory-verified torque specsnone yet for this vehicle

No torque value on this vehicle has been checked by hand yet. The full list below is estimated.

Codes, recalls, maintenance

Full specs
5-Year Cost of Ownership
$25,544 maintenance + known platform issues
~$5,109/yr · 430¢/mile equivalent · $7,115 maintenance + $15,509 expected platform issues

Common Problems & Known Issues

The W164 ML350 BlueTEC with the OM642 diesel is a capable platform undermined by catastrophic engine failures tied to poor emissions design and inadequate oil monitoring. When maintained obsessively, it's solid; when neglected even slightly, you're looking at five-figure engine rebuilds.

OM642 Catastrophic Engine Failure (Swirl Flap & Oil Contamination)

Common · high severity
Typical onset: 80,000-150,000 mi
Symptoms: Sudden loss of power, rattling from intake manifold, Metal shavings in oil, scored cylinder walls, Check engine light with multiple misfire codes, Complete seizure in worst cases
Fix: Intake manifold swirl flaps fail and get ingested into cylinders, destroying pistons, rings, and cylinder walls. Full engine rebuild or short block replacement required, 40-60 hours labor depending on extent of damage. Many shops won't touch it—you're sourcing a reman long block.
Estimated cost: $12,000-18,000

EGR Cooler Failure Leading to Coolant in Oil

Common · high severity
Typical onset: 90,000-130,000 mi
Symptoms: White smoke from exhaust on cold start, Milky oil on dipstick or oil cap, Coolant loss with no external leaks, Overheating or rough idle
Fix: EGR cooler cracks internally, allowing coolant into oil system. If caught early, cooler replacement is 8-10 hours. If driven with contaminated oil, you're doing bearings, pistons, and possibly a full rebuild. Delete kits exist but aren't emissions-legal.
Estimated cost: $2,500-4,000 (cooler only); $8,000-15,000 (with engine damage)

Transmission Oil Cooler Line Leaks

Common · medium severity
Typical onset: 70,000-110,000 mi
Symptoms: Transmission fluid pooling under vehicle, Burned transmission fluid smell, Harsh shifting or slipping when fluid is low, Pink fluid on driveway
Fix: Hard lines and rubber hoses to the external trans cooler corrode and split. Cooler itself often fails simultaneously. Lines are 3-4 hours, but expect to do the cooler and a full fluid flush at the same time. Ignore this and you'll grenade the 7G-Tronic.
Estimated cost: $800-1,500

Diesel Particulate Filter (DPF) Clogging and Sensor Failures

Common · medium severity
Typical onset: 60,000-100,000 mi
Symptoms: Limp mode, reduced power warning, Excessive regen cycles, poor fuel economy, Check engine light with P2002 or P242F codes, Strong diesel smell during regen
Fix: Short trips and low-quality diesel kill the DPF. Pressure sensors fail frequently (2 hours each). A clogged DPF requires removal and cleaning ($600-900) or replacement ($2,500+ OE). Off-road delete is $1,200-1,800 but illegal for road use.
Estimated cost: $400-3,000

Fuel Injector Failure and 'Black Death'

Occasional · high severity
Typical onset: 100,000-150,000 mi
Symptoms: Hard starting, extended cranking, Black carbon buildup (black death) around injector seats, Rough idle, white smoke, Fuel odor in engine bay, external leaks
Fix: Piezo injectors fail and leak externally, causing carbon buildup that erodes the aluminum head. Injectors are $500-800 each. If black death has set in, you're looking at head removal, machining, and sleeve installation—15-25 hours. Some heads are scrapped.
Estimated cost: $1,200-2,500 (injectors only); $4,000-7,000 (with head work)

Transmission Mount and Engine Mount Failures

Common · low severity
Typical onset: 80,000-120,000 mi
Symptoms: Clunk on acceleration or deceleration, Vibration at idle, especially in Drive, Excessive engine movement visible from engine bay
Fix: Hydraulic mounts fail, especially the rear transmission mount. Straightforward replacement, 2-3 hours for the trans mount, 1-2 hours per engine mount. Do them all at once if one has failed.
Estimated cost: $600-1,200

Airmatic Suspension Compressor and Strut Leaks

Occasional · medium severity
Typical onset: 90,000-140,000 mi
Symptoms: Vehicle sagging overnight, especially rear, Compressor runs constantly, won't shut off, Airmatic warning on dash, Harsh ride or inability to raise suspension
Fix: Airmatic struts leak at the bellows or seals; compressor overworks and burns out. Each strut is 2-3 hours, compressor is 3-4 hours. Aftermarket conversions to coil springs run $1,000-1,500 if you're tired of the system.
Estimated cost: $1,200-2,000 (per strut); $1,500-2,200 (compressor)
Owner tips
  • Change oil every 5,000 miles with MB 229.51-spec oil—this engine is unforgiving of extended intervals
  • Use only premium diesel from high-volume stations; water and contamination are death sentences
  • Do monthly long highway drives (30+ min at 60+ mph) to complete DPF regens if you're a short-trip driver
  • Inspect for coolant and oil leaks every oil change; catching EGR cooler failure early saves the engine
  • Budget $2,000/year in maintenance and have a $10,000 engine-failure fund if buying high-mileage
Only buy this if you're a diesel enthusiast with deep pockets and a trusted diesel specialist on speed-dial—it's a ticking time bomb without religious maintenance, but a unicorn if you get a good one.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API key: 10 requests/day, 100/month, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, built by the same team.
See what's included →