🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2014 MERCEDES-BENZ S600

6.0L V12 BiTurbo M279RWDAUTOMATICgasM279turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S600
Every control module on the 2014-2017 Mercedes-Benz S600 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electronic Transmission Control (ETC)4.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Transmission bell housing, driver side
🔧 Xentry/DAS with SCN
⚠️ 7-speed 7G-TRONIC PLUS; transmission drop required; adaptive learning reset mandatory
Climate Control Module (CCM)3.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, center behind HVAC controls
🔧 Xentry/DAS
⚠️ 4-zone automatic climate with air balance; requires dash removal for access
Motor Electronics (ME-SFI)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine compartment, left side firewall behind battery
🔧 Xentry/DAS with SCN
⚠️ V12 biturbo M277 engine; EIS-ECM-cluster security triangle; online SCN authorization mandatory
Electronic Ignition Switch (EIS)2.0 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Steering column, behind ignition lock cylinder
🔧 Xentry/DAS with SCN + IR key sync
⚠️ Keyless-Go; cryptographic pairing with ECM/cluster; key programming requires online authorization
Magic Body Control (MBC)2.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Windshield, behind rearview mirror (stereo camera)
🔧 Xentry/DAS with SCN
⚠️ Road surface scan for suspension pre-adjustment; integrates with ABC; camera calibration critical
COMAND Control Unit (COMAND)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, left side behind trim panel
🔧 Xentry/DAS
⚠️ COMAND NTG4.5/NTG5; hard drive navigation; fiber optic MOST bus; VIN-locked
Active Body Control (ABC)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, right side firewall
🔧 Xentry/DAS with SCN
⚠️ Hydraulic active suspension; pump and accumulator failures common; system bleed required after service
Electronic Stability Program / Anti-lock Brake System (ESP)1.8 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, left front near fender
🔧 Xentry/DAS with SCN
⚠️ Conventional ESP system (SBC discontinued); integrates with Pre-Safe and Distronic
Signal Acquisition Module - Rear (SAM-R)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Trunk, right side behind trim panel
🔧 Xentry/DAS with SCN
⚠️ Controls rear lighting, fuel pump relay, trunk functions; VIN-locked
Surround View Camera Control Unit (SVC)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk, center behind trim panel
🔧 Xentry/DAS with SCN
⚠️ 360-degree camera system; camera calibration mandatory after replacement
Central Gateway (CGW)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Dashboard, left side behind knee bolster
🔧 Xentry/DAS with SCN
⚠️ Enhanced security gateway; CAN/FlexRay hub; VIN-locked; blocks unauthorized module access
Intelligent Light System Control Unit (ILS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, integrated in headlight assemblies
🔧 Xentry/DAS
⚠️ LED Intelligent Light System; adaptive high beam assist; headlight aim calibration required
Distronic Plus Control Unit (DTR)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind front grille, integrated with radar sensor
🔧 Xentry/DAS with SCN
⚠️ Adaptive cruise with steering assist; radar aim calibration mandatory after replacement
Supplemental Restraint System Control Unit (SRS)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath front armrest
🔧 Xentry/DAS with SCN
⚠️ VIN-locked; crash data stored; must clear crash data after collision repair
Door Control Module - Rear Right (DCM-RR)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear right door, behind door panel
🔧 Xentry/DAS or Autel
⚠️ Soft-close doors; window and sunshade control
Instrument Cluster (IC)1.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind instrument panel
🔧 Xentry/DAS with SCN
⚠️ TFT display; mileage stored; part of EIS-ECM security triangle; odometer programming requires dealer authorization
Fuel Pump Control Module (FPCM)1.0 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, right side near fuel tank
🔧 Xentry/DAS or Autel
⚠️ Dual fuel pumps on V12; controlled via SAM-R
Parktronic Control Unit (PTS)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, left side behind trim panel
🔧 Xentry/DAS or Autel
⚠️ Front and rear sensors; sensor calibration required after replacement
Seat Control Module - Rear Right (SCM-RR)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear right seat, under seat cushion
🔧 Xentry/DAS or Autel
⚠️ Executive rear seating package; massage and recline functions
Telematics Communication Module (TCM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk, right side near SAM-R
🔧 Xentry/DAS with SCN
⚠️ 3G/4G cellular; mbrace services; VIN-locked; requires subscription activation
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →