P0012moderate severityPowertrain
Intake Camshaft Position Timing Over-Retarded Bank 1
on 2007 Mercedes-Benz S65 AMG 6.0L V12 BiTurbo M275 · RWD
What this code means
The intake camshaft timing for Bank 1 is more retarded than the PCM commanded position.
Symptoms
- Check Engine Light
- Loss of power
- Poor acceleration
- Rough idle
Common causes
- VVT solenoid failure
- Low oil pressure
- Oil passage blockage
- Timing chain wear
Diagnostic steps
- Check oil level and condition
- Test VVT solenoid
- Check oil pressure
- Monitor cam timing with scan tool
Repair notes
Replace VVT solenoid or clean oil passages.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0016
Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A