U0011moderate severityNetwork
Control Module Communication Bus A Low
on 2007 Mercedes-Benz S65 AMG 6.0L V12 BiTurbo M275 · RWD
What this code means
The voltage on communication bus A is too low, disrupting data sharing between modules. Modules may not talk to each other properly.
Symptoms
- Multiple warning lights on
- Modules not responding
- Erratic gauge behavior
Common causes
- Shorted bus A wiring to ground
- Faulty control module
- Corroded or loose connectors
- Damaged wiring harness
Diagnostic steps
- Scan all modules for U-codes
- Inspect bus A wiring for shorts
- Measure bus A voltage with meter
- Isolate modules to find fault
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus