Free API
6.0L V12 BiTurbo M275RWDAUTOMATICgasM275turbo
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0803low severityPowertrain

1-4 Upshift (Skip Shift) Solenoid Control Circuit

on 2010 Mercedes-Benz S65 AMG 6.0L V12 BiTurbo M275 · RWD

What this code means

A fault exists in the 1-4 upshift (skip shift) solenoid control circuit used on manual transmissions to force an economy shift. The circuit may be open, shorted, or the solenoid failed.

Symptoms

  • Skip shift light illuminated
  • Check engine light on
  • Forced upshift not working

Common causes

  • Faulty skip shift solenoid
  • Open or short in control wiring
  • Corroded or damaged connector
  • Faulty PCM output driver

Diagnostic steps

  1. Retrieve stored codes and freeze frame
  2. Inspect solenoid wiring and connector
  3. Measure solenoid resistance
  4. Verify PCM control signal and ground

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Mercedes-Benz S65 AMG repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mercedes-Benz S65 AMG — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →