2A0Fhigh severityPowertrain
Intake Camshaft Position Sensor Plausibility Fault
on 2011 Mini Clubman 1.6L I4 · FWD
What this code means
The intake camshaft position sensor signal is implausible compared to expected values (OBD P0340). The ECU cannot reliably determine camshaft timing.
Symptoms
- Hard starting
- Check engine light
- Rough running or stalling
Common causes
- Faulty camshaft position sensor
- Damaged sensor wiring/connector
- Faulty VANOS solenoid
- Timing chain wear or stretch
Diagnostic steps
- Scan for related camshaft codes
- Inspect sensor wiring and connector
- Test sensor signal with oscilloscope
- Check timing chain and VANOS operation
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1