Free API
2A87moderate severityPowertrain

Exhaust VANOS Position Control Deviation, Bank 1

on 2024 Mini Cooper SE Electric · FWD

What this code means

The exhaust camshaft VANOS actuator cannot reach its commanded position (OBD P0014). The ECU detects a control deviation between target and actual exhaust camshaft timing.

Symptoms

  • Rough idle
  • Reduced power
  • Check engine light

Common causes

  • Sticking or faulty VANOS solenoid
  • Dirty engine oil/clogged solenoid screen
  • Low oil pressure
  • Timing chain wear

Diagnostic steps

  1. Read VANOS actual vs target values
  2. Inspect and clean VANOS solenoid
  3. Check engine oil level and pressure
  4. Test VANOS unit operation

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2024 Mini Cooper SE repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mini Cooper SE — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →