CC-ID-236critical severityChassis
Brake and Stability Systems Failure
on 2024 Mini Cooper SE Electric · FWD
What this code means
This message indicates simultaneous failure of the braking and stability control systems. It is raised by the DSC/ABS control unit.
Symptoms
- Brake and DSC warning lights on
- Loss of ABS and stability assistance
- Extended stopping distances
Common causes
- Faulty wheel speed sensor
- DSC/ABS control module fault
- Hydraulic pressure sensor failure
- Wiring or connector issue
Diagnostic steps
- Scan DSC/ABS module for fault codes
- Check wheel speed sensors
- Inspect brake hydraulic system
- Verify module power and ground
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic