CC-ID-293moderate severityPowertrain
Press Brake and Select Neutral to Start
on 2024 Mini Cooper SE Electric · FWD
What this code means
The engine cannot start until the brake is pressed and neutral is selected. This is raised by the transmission and start/stop control system.
Symptoms
- Engine will not crank
- Start prompt on display
- No response to start button
Common causes
- Selector not in Park or Neutral
- Brake pedal not pressed
- Faulty brake pedal switch
- Range sensor fault
Diagnostic steps
- Press brake pedal firmly
- Select Neutral or Park
- Retry engine start
- Check brake switch and range sensor if fault persists
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1