CC-ID-351high severityChassis
4X4 and DSC Failure
on 2024 Mini Cooper SE Electric · FWD
What this code means
A combined fault has been detected in the all-wheel-drive system and Dynamic Stability Control. The message is raised by the transfer case and stability control modules.
Symptoms
- Loss of AWD and stability control
- Reduced traction and handling
- Multiple warning lamps illuminated
Common causes
- Wheel speed sensor fault affecting both systems
- Transfer case control module failure
- DSC/ABS module fault
- CAN bus communication error
Diagnostic steps
- Scan DSC and transfer case modules
- Check wheel speed sensor signals
- Verify CAN bus communication
- Inspect module wiring and connectors
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic