CC-ID-368high severityPowertrain
Transmission Failsafe Active
on 2024 Mini Cooper SE Electric · FWD
What this code means
The transmission is currently operating in failsafe mode due to a detected fault. The TCM limits function to protect the gearbox until the issue is resolved.
Symptoms
- Limited gearbox operation
- Gearbox warning message
- Poor shift quality
Common causes
- Solenoid or sensor malfunction
- Low transmission fluid
- Mechatronic module fault
- Overheated transmission
Diagnostic steps
- Scan transmission control module
- Check fluid level and temperature
- Inspect electrical connections
- Test solenoids and pressure sensors
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1