Free API
CC-ID-384high severityChassis

DSC puncture detection active

on 2024 Mini Cooper SE Electric · FWD

What this code means

The stability control system has detected a tire pressure loss or puncture through wheel speed analysis. Raised by the DSC module with tire monitoring function.

Symptoms

  • Puncture warning displayed
  • Handling instability
  • Tire pressure loss indicated

Common causes

  • Tire puncture or pressure loss
  • Underinflated tire
  • Wheel speed sensor fault
  • DSC calibration error

Diagnostic steps

  1. Inspect all tires for damage
  2. Check and adjust tire pressures
  3. Scan DSC for stored codes
  4. Reset tire monitoring system

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2024 Mini Cooper SE repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mini Cooper SE — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →