CC-ID-402low severityChassis
Apply Foot Brake
on 2024 Mini Cooper SE Electric · FWD
What this code means
The vehicle requires the brake pedal to be pressed to proceed with an action such as starting the engine or shifting out of Park. This prompt is raised by the transmission or start-stop control system.
Symptoms
- Cannot start engine
- Cannot shift out of Park
- Message repeats on start attempt
Common causes
- Brake pedal not pressed during start
- Faulty brake pedal switch
- Brake light switch wiring fault
- Low brake system pressure
Diagnostic steps
- Press and hold the brake pedal firmly
- Check brake pedal switch operation
- Test brake light switch signal
- Inspect switch wiring and connectors
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic