Free API
CC-ID-446low severityPowertrain

Launch Control

on 2024 Mini Cooper SE Electric · FWD

What this code means

Indicates launch control is active or its status for maximum acceleration from standstill. Raised by the engine/transmission control system.

Symptoms

  • Launch control status message
  • Elevated engine RPM at standstill
  • Availability or readiness indication

Common causes

  • Launch control activated by driver
  • Conditions not met for activation
  • Transmission temperature out of range
  • Drivetrain protection limit reached

Diagnostic steps

  1. Verify launch control activation conditions
  2. Check transmission and engine temperatures
  3. Read fault codes from powertrain modules
  4. Confirm proper drive mode selection

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2024 Mini Cooper SE repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mini Cooper SE — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →