U0429high severityNetwork
Invalid Data Received From Steering Angle Sensor Module
on 2024 Mini Cooper SE Electric · FWD
What this code means
A control module is getting invalid or out-of-range data from the steering angle sensor over the network. This can disable stability and steering assist features that rely on knowing wheel position.
Symptoms
- Stability control warning light
- Loss of power steering assist
- Steering feels different or erratic
Common causes
- Faulty steering angle sensor
- Sensor needs calibration
- Wiring or connector fault at sensor
- CAN bus communication problem
Diagnostic steps
- Scan for stored U- and C-codes
- Inspect steering angle sensor wiring
- Perform steering angle sensor calibration
- Check CAN bus continuity to sensor
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High