U2023low severityNetwork
Fault Received from External Node
on 2003 Mini Cooper 1.6L I4 · FWD
What this code means
A control module has received a fault notification from another module on the network, indicating a dependent system has a problem.
Symptoms
- Warning light for secondary system
- Cascading DTCs across modules
- Feature limited due to external fault
- System in reduced functionality mode
Common causes
- Primary fault exists in another module
- Dependent system has active DTC
- Communication issue causing fault propagation
- Software glitch sending false fault signal
Diagnostic steps
- Scan all modules for DTCs
- Find the primary fault code
- Address the original fault first
- Clear codes after primary repair
- Retest all systems
Repair notes
This is a cascading code. Find and fix the original DTC in the source module first.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
CC-ID-181
System Check Failed
CC-ID-207
Central Electronics Failure, Stop Vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High