P3013moderate severityPowertrain
Camshaft Profile Actuator A Stuck Bank 2
on 2007 Mini Cooper 1.6L I4 · FWD
What this code means
The camshaft profile switching actuator for Bank 2, intake side, is mechanically stuck in one position.
Symptoms
- Check Engine Light
- Uneven power between cylinder banks
- Misfires on one bank at high RPM
- Vibration at certain RPM ranges
- Reduced peak power
Common causes
- Oil passage blockage Bank 2
- Faulty actuator solenoid Bank 2
- Low oil pressure
- Worn actuator pins
- Debris in oil gallery
Diagnostic steps
- Check oil condition
- Command Bank 2 cam profile switch
- Compare Bank 1 vs Bank 2 cam profile timing
- Test oil pressure at Bank 2 actuator feed
- Inspect actuator screen
Repair notes
Replace Bank 2 cam profile actuator solenoid. Clean oil passages.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1