P1086moderate severityPowertrain

Fuel Control Mixture Rich Bank 2

on 2010 Mini Cooper 1.6L I4 · FWD

What this code means

The DME detected a rich fuel mixture condition on Bank 2 that is beyond the adaptive fuel trim correction range. Fuel trims have reached their maximum negative adjustment limit.

Symptoms

  • Check Engine Light
  • Black smoke from exhaust
  • Strong fuel odor
  • Rough idle
  • Reduced power

Common causes

  • Leaking fuel injectors Bank 2
  • Faulty O2 sensor Bank 2
  • Fuel pressure too high
  • EVAP system fault
  • Crankcase vent valve stuck open

Diagnostic steps

  1. Monitor Bank 2 fuel trims
  2. Test O2 sensor Bank 2 response time
  3. Check fuel pressure with gauge
  4. Test EVAP purge valve
  5. Inspect CCV system

Repair notes

Diagnose and repair the root cause of excess fuel delivery on Bank 2.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Mini Cooper repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mini Cooper — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →