P1348high severityPowertrain

Misfire Cylinder 4 With Fuel Cut-Off

on 2010 Mini Cooper 1.6L I4 · FWD

What this code means

The DME detected a severe misfire on Cylinder 4 triggering fuel cut-off to protect the catalytic converter. This is a catalyst protection strategy that disables fuel delivery to the misfiring cylinder.

Symptoms

  • Check Engine Light flashing
  • Rough running
  • Reduced power
  • Engine vibration at idle

Common causes

  • Faulty ignition coil Cylinder 4
  • Worn or fouled spark plug Cylinder 4
  • Injector failure Cylinder 4
  • Low compression Cylinder 4
  • Intake manifold leak

Diagnostic steps

  1. Check misfire counters
  2. Swap ignition coil from Cylinder 4
  3. Replace spark plug Cylinder 4
  4. Test injector Cylinder 4
  5. Compression test

Repair notes

Replace the faulty ignition component on Cylinder 4.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Mini Cooper repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mini Cooper — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →