P3624high severityPowertrain
Cylinder Deactivation System Oil Pressure Low
on 2010 Mini Cooper 1.6L I4 · FWD
What this code means
The oil pressure dedicated to the cylinder deactivation system is below the minimum threshold for reliable lifter switching.
Symptoms
- Check Engine Light
- Cylinder deactivation disabled
- Engine noise during attempted deactivation
- Lifter tick on deactivation command
- Oil pressure warning at idle
Common causes
- Low engine oil level
- Oil pump wear reducing pressure
- Wrong oil viscosity installed
- VLOM assembly internal leak
- Clogged oil filter restricting flow
Diagnostic steps
- Check engine oil level and condition
- Measure oil pressure at deactivation gallery
- Verify correct oil viscosity
- Test VLOM assembly seal integrity
- Inspect oil filter for restriction
Repair notes
Top off or change engine oil with correct AFM-compatible specification. Replace oil pump if pressure is low at all speeds. Replace VLOM if internal leak found.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
29CC
Misfire Cylinder 1
29CD
Misfire Cylinder 2
29CE
Misfire Cylinder 3
29CF
Misfire Cylinder 4
29D0
Misfire Cylinder 5
29D1
Misfire Cylinder 6
29D2
Misfire Cylinder 7
29E0
Lambda Additive/Idle Adaptation Limit, Bank 1
29E1
Lambda Additive/Idle Adaptation Limit, Bank 2
29E2
Lambda Multiplicative Part-Load Adaptation Limit, Bank 1