P0121high severityPowertrain
Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance
on 2000 Mitsubishi Eclipse 2.4L I4 · FWD
What this code means
The TPS signal does not match expected values for the current operating conditions.
Symptoms
- Check Engine Light
- Erratic throttle response
- Stalling
- Hesitation
- Limp mode
Common causes
- Worn TPS
- Carbon buildup on throttle body
- Sticking throttle plate
- Loose throttle cable
Diagnostic steps
- Monitor TPS signal during throttle sweep
- Check for flat spots or dropouts
- Clean throttle body
- Inspect throttle cable/linkage
Repair notes
Clean throttle body. Replace TPS if signal is erratic.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1